Zipper jig
With this tool, you can easily and quickly pull sliders on endless zipper long chain by-the-yard. The zipper jig holds zipper sliders and unlocks automatic sliders which are particularly difficult to install. You can save enormous time and increase your productivity.
Safety benefits that minimize the risk of injury:
Saxotex' zipper forks have rounded edges on the insertion slot. In 2018, we continued to improve our zipper jigs so they no longer tower over the table edge.- Massive silver steel (115CrV3) tool body milled
- Screw clamp for tabletops up to 45 mm thick
- Size 1 for sliders up to 7 mm chain width
- Size 2 for sliders over 7 mm chain width
- Zipper jig Duo for all zipper slider sizes
- Made in Germany
Synonyms: Fork Clamp Tool, Zipper aid, zipper rearing tool, zipper holder
Bed Linen Zipper Slider Tool
Sliders without a handle are quite difficult to pull on the zipper chain. With our bed linen zipper slider tool – in a nutshell "Bezi" – you pull the flat sliders effortlessly and quickly onto long zipper chain. With this professional tool, you can save a lot of time and increase your productivity if you have to pull sliders without pull tab on bedding zippers in series or mass production.
Bed linen flat sliders from various manufacturers, including Opti, whose zippers are often preferred by the bed linen industry, fit into our device. We can also customize "Bezi" to suit your sliders.
"Bezi" is also suitable if you want to pull sliders, whose pull tab will be mounted later, on endless zipper chain. That's what we're showing in this video.
Synonyms: Flat Slider Device, Slider without Pull Tab Gadget, Bed Linen Zipper Jig
Top stops pliers Osborne No. 1012
Professional pliers made of forged steel for properly pressing of top stops on zippers.
- Multi-stage jaws for different sizes of top stops
- Easier handling by closing spring force
- 18.5 cm long, ca. 250 g weight
- Anti-slip vinyl handles
Synonyms: zipper top stop tool
Crimp pliers
Simple crimp pliers made of construction steel for occasional mounting of top stops on zippers.
- Opening spring force
- 13 cm long, 64 g weight
- Anti-slip vinyl handles
End cutting nipper SX for zipper teeth
- Forged of C60 tool steel
- Precision box joint
- Pincer head one-sided flat
- Pincer body quenched and tempered on 42 ±2 HRC
- Inductively hardened cutting edges: 62 ± 2 HRC, with small facet
- 3 mm cut power, tested on brass zipper teeth
- Dimensions:
- Total length: 11.5 cm
- Jaw length: 6 mm
- Head width (cutting length): 12 mm
- Jaw width, closed: 11 mm
- Jaw thickness: 7 mm
- Weight: 78 g
- Opening spring force
- Anti-slip vinyl handles
- Made in Germany
Synonyms: forehead cutter, orthogonal side cutter, string cutter, wire clipper, front cutting pliers
Flat pliers - 6 mm
- Forged from unalloyed quenched and tempered steel
- Single joint
- Forged-raw inner sides of jaws improves grip when bending the zipper top stops with 3 prongs
- Dimensions:
- Total length: 12 cm
- Jaws length: 26 mm
- Jaws width 6.3 mm
- Jaws thickness at front: 1.5 mm, back: 5.5 mm
- Weight:60 g
- Opening spring force
- Anti-slip plastic handles
Flat pliers - 4 mm
- Forged from quenched and tempered C45 steel
- Precision box joint
- Hardness: 46 ± 2 HRC
- Inner sides of jaws smooth or rough, with blunted cut
- Dimensions:
- Total length: 11.5 cm
- Jaws length: 22 mm
- Jaws width: 4 mm
- Jaws thickness at front: 1 mm, back: 4.5 mm
- Weight:63 g
- Opening spring force
- Anti-slip vinyl handles
- Made in Germany
Flat-round long nose pliers
- Forged from quenched and tempered C45 steel
- Precision box joint
- Hardness: 46 ± 2 HRC
- Inner sides of jaws smooth or rough, with blunted cut
- Dimensions:
- Total length: 11.5 cm
- Jaws length: 22 mm
- Jaws width at front: 1.8 mm, back: 6.5 m
- Jaws thickness at front: 1.3 mm, back: 4.5 mm
- Weight:63 g
- Opening spring force
- Anti-slip vinyl handles
- Made in Germany
Synonyms: Long nose half-round pliers
Multi Purpose Pliers
- 21 cm long, ca. 470 g weight
- Anti-slip plastic coated handles
Synonyms: zipper stops pliers, top stop tool, bottom stop pincer
Swap jaws for multi purpose pliers
Interchangeable pressing jaws for the neat pressing of various top stops & bottom stops on zippers
- Pressing jaws for universally usable, u-shaped bottom stops with 4 prongs
- RT0 for zippers with 4 mm chain width
- RT10 for zippers with 6 mm chain width
- RT20 for zippers with 8 mm chain width
-
Pressing jaws for x-shaped bottom stops for plastic moulded zippers & metal zippers of any chain widths
Instructions
Spiral zipper chain cutting tool "Gappy"
The tool is only available for 4 to 6.7 mm wide spiral chains. Each chain width requires a separate tool. The tool is not suitable for woven spiral zippers.
The name "Gappy" comes from the gapping process in the industrial zipper production. (Privacy notice: The video at the following link opens on the YouTube website.) external A gapping tool punches gaps in the endless zipper chain, before it is cut into finished lengths. Our "Gappy" tool does not punch gaps, but it has the same purpose: It removes the zipper chain from the zipper tape.
Magazine pliers for zipper bottom stops staples
(Old) Magazine pliers for 5 mm wide bottom stops
Magazine pliers for 6 mm wide bottom stops
With these pliers in the type of staple tools (pliers stapler) you can attach bottom stops on zippers with 4 mm and 5 mm or 6 mm chain width. The bottom stops clamps are available compounded as a staple strip. With up to 2 staple strips, you can insert about 50 bottom stops at once into the magazine of the bottom stop stapler. This allows you to attach bottom stops to zippers faster than using the Multi purpose pliers.
These bottom stops are only 1.5 mm long. Therefore, they cover the zipper chain less than the 3 to 4 mm long bottom stops used on fully automatic produced spiral zippers. Nevertheless, these bottom stop staples, which are only 1.5 mm long, also reliably stop the zipper slider so that the slider does not slide off the zipper chain. These zipper bottom stop stapling pliers are ruggedly built for constant industrial use.Application examples